Serving the Mobile area  ·  (251) 319-2788  ·  Open Mon-Sun 7am-7pm
📞 (251) 319-2788 Free Quote

Metal Roofing in Spanish Fort, AL (36527) · Local Professionals

Mobile Metal Roofing · Fast response in Spanish Fort and the Mobile area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+309Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Spanish Fort sits on a bluff above the Mobile Bay, and the homes up and down the bluff catch every bit of wind and salt the Gulf throws at them. From the older waterfront properties near the Spanish Fort Yacht Club to the newer subdivisions off Spanish Fort Boulevard and around Meaher State Park, most roofs here are one good storm away from a problem.

That is why homeowners in 36527 call Mobile Metal Roofing. We install, repair, and replace metal roofs built for this exact climate: hot, humid summers, daily thunderstorms, and hurricane season that tests every fastener and seam. Whether you are in a bayfront home on the bluff or a brick ranch off Highway 31, we know what fails here and how to fix it right.

Metal Roofing in Spanish Fort (36527)

Spanish Fort is not flat like much of Mobile. The town rises from the bay to the bluff, and that grade changes everything about roofing. Homes on the bluff face full wind off the water, so standing seam panels and proper fastening are not optional. Down closer to the bay, salt air eats at screws and flashing faster than most homeowners expect. And the mix of housing stock means we see everything from older camp-style homes near the causeway to new construction in Stonebridge and around the Spanish Fort Town Center. Tight lots in some of the older neighborhoods mean we plan staging and material delivery carefully, and low-pitched roofs on 1970s ranches often need a different approach than the steep gables on newer builds.

Our team has worked across the Eastern Shore and Mobile County for years. We know which suppliers can get standing seam panels rolled to length quickly, how to schedule with the city and county on permits, and what the wind-driven rain here does to a roof that was not detailed correctly. If your roof is on a bluff, near the water, or under live oaks that drop limbs, we have seen the damage pattern before.

Our services in Spanish Fort

How a Job Works in Spanish Fort

Step 1: You call us at (251) 319-2788 or request a free estimate online. We schedule an on-site assessment, usually within a day or two. We walk the roof, check the attic if accessible, look at fasteners, seams, flashing, and drainage, and take photos. You get a written scope and a clear price before any work starts.

Step 2: Once you approve, we pull the required roofing permit with the City of Spanish Fort or Baldwin County, depending on your address. We coordinate with your HOA if you have one, especially in subdivisions like Stonebridge or the Reserve. On the bluff, we plan for wind exposure and use enhanced fastening where needed. Material delivery is scheduled around your driveway and lot access, and we protect landscaping and siding during tear-off.

Step 3: When the work is done, we clean the site thoroughly. We magnet-sweep for nails, haul away all debris, and walk the finished roof with you. We do not leave until you have seen the details, understand the warranty, and are satisfied with the cleanup.

Pricing in Spanish Fort depends on the roof size, pitch, access, and condition. For a typical single-story ranch, metal roof installation starts around $8 per square foot, with standing seam at about $10 per square foot and metal roof replacement at about $9 per square foot. If you are retrofitting over existing shingles, that starts around $7 per square foot, but code limits how many layers you can leave in place. Repairs like leak fixes start around $450, and screw replacement or re-fastening starts around $750. Storm and wind damage inspections are free, and we document everything for your insurance claim. We give you a firm written estimate before work begins. Call (251) 319-2788 to schedule your free estimate.

My house is on the bluff near the Spanish Fort Yacht Club, and the wind off the bay is relentless. What metal roof holds up best here?
For bluff-top homes, we usually recommend standing seam metal roofing with concealed fasteners. There are no exposed screws for wind to lift or salt to corrode, and the panels are rated for high wind uplift. We also check the decking and use enhanced fastening patterns where the wind exposure is worst. On older homes, we may need to add strapping or replace sheathing to meet current wind standards.
A storm just blew through Spanish Fort and I think some panels lifted. How fast can you get out for storm damage repair?
We prioritize storm and wind damage calls in Spanish Fort and the surrounding area. Call us at (251) 319-2788, and we will schedule a free inspection, usually within 24 to 48 hours after a storm. We tarp active leaks if needed, document the damage with photos for your insurance company, and give you a repair estimate. We never promise coverage, but we do make the claim process easier.
What does a metal roof cost for a typical three-bedroom ranch in Spanish Fort?
For a 1,500 to 2,000 square foot ranch with a low pitch, you are looking at roughly $12,000 to $20,000 for installation, depending on the panel type and whether we need to remove existing shingles. Standing seam runs higher, around $15,000 to $25,000. Repairs are much less, starting around $450 for a leak fix. The best way to know is a free on-site estimate, since access and roof condition vary a lot here.
Do I need a permit to replace my roof in Spanish Fort, and who handles it?
Yes, a roofing permit is typically required for a full replacement or re-roof in Spanish Fort. The permit comes from the City of Spanish Fort if you are inside the city limits, or Baldwin County if you are in the unincorporated area. We handle the application and inspection scheduling for you. Requirements can change, so we always confirm with the local building department before starting.
My HOA in Spanish Fort has design rules. Can you help with approval for a metal roof?
Yes. Many subdivisions in Spanish Fort, especially newer ones, have architectural review requirements. We provide panel profile samples, color chips, and specification sheets to submit to your HOA. We can also attend a review meeting if needed. If your home is near a property line, we make sure the installation meets setback and drainage rules so you do not create a problem with your neighbor.
Are you insured for work on my Spanish Fort property?
We are fully insured, with general liability and workers' compensation coverage. That protects you if anyone is injured on the job or if property is damaged. We are happy to send it to your HOA or property manager as well.
What maintenance does a metal roof need in Spanish Fort's climate?
The main thing here is checking fasteners and seals after storm season. Salt air and wind-driven rain can work screws loose over time, especially on exposed fastener roofs. We recommend an inspection each spring and after any major storm. Keep gutters clear of live oak leaves and pine needles, and trim branches back from the roof. A quick check now prevents a leak later.
Why choose us?

Trusted professionals in Mobile

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Mobile

All your work handled by qualified professionals in Mobile

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

309+ Verified Client Reviews in Mobile

⭐⭐⭐⭐⭐ 4.9/5 · 309 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Mobile · Response within 24h · No commitment · ☎ (251) 319-2788

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Mobile ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm