Serving the Mobile area  ·  (251) 319-2788  ·  Open Mon-Sun 7am-7pm
📞 (251) 319-2788 Free Quote

Metal Roofing in Gulf Shores, AL (36542) · Local Professionals

Mobile Metal Roofing · Fast response in Gulf Shores and the Mobile area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+309Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Gulf Shores is a beach town where the salt spray hits your roof every day, and the wind off the Gulf doesn't let up. Whether you're in a raised beach cottage off West Beach Boulevard or a condo near the Hangout, your roof takes a beating that inland roofs never see.

That's why homeowners and property managers in Gulf Shores (36542) call Mobile Metal Roofing. We know how salt air eats through fasteners, how wind-driven rain finds every gap, and how to keep a metal roof tight in a town that gets hit by storms named in the news. We're based in Mobile, just up the road, and we've been installing and repairing metal roofs across the Gulf Coast for years.

Metal Roofing in Gulf Shores (36542)

Gulf Shores is built on sand and low ground, and that changes how roofing works here. Beach cottages and condos sit close together on tight lots, often with little room for staging, and many are raised on pilings. The salt air is relentless: it corrodes standard fasteners and flashing, which is why we use corrosion-resistant screws and materials rated for coastal exposure. Wind is the other big factor. After a tropical storm or hurricane, we see lifted panels, separated seams, and failed edge metal. Standing seam roofing with concealed fasteners is a favorite here because it holds up better to wind uplift, and metal roof coating is a smart option for older roofs that are still structurally sound but showing their age. We also deal with heavy rain and humidity, so proper ventilation and flashing details matter more than the panel itself. Our team has worked on everything from beachfront cottages to commercial buildings along the coast, and we understand the local building department's requirements for wind ratings and permits.

We've been serving Gulf Shores and the surrounding Mobile area for years, and we know the neighborhoods from the beach to the back bays.

Our services in Gulf Shores

How a Job Works in Gulf Shores

Step 1: You call us at (251) 319-2788 or request a free estimate online. We'll schedule a time to come out and inspect your roof, whether it's a beach cottage, a condo, or a commercial building. We look at the panels, fasteners, flashing, and attic ventilation, and we give you a written estimate with options. If it's a storm damage situation, we'll document everything for your insurance claim.

Step 2: Once you approve the estimate, we pull the necessary permits with the City of Gulf Shores (or the appropriate jurisdiction) and schedule the work. On tight beach lots, we plan material delivery carefully to avoid blocking neighbors. If your property is in an HOA or historic district, we help coordinate color and profile approvals. Our crew is fully insured and follows local wind-uplift requirements.

Step 3: After the work is done, we clean up thoroughly, haul away old materials, and do a final walkthrough with you. We make sure you're satisfied and that every detail is right before we leave. We treat your property like it's our own.

Pricing for metal roofing in Gulf Shores depends on the size and complexity of your roof, the material you choose, and whether it's a new installation or a repair. As a ballpark, metal roof installation starts at $8 per square foot, standing seam from $10, metal roof replacement from $9, and metal roof over shingles from $7. Repairs start at $450, and screw replacement or re-fastening starts at $750. Coating and painting start at $2.50 per square foot, which is a popular option for beach cottages where the roof is still solid but the finish is worn. We offer free estimates, so call (251) 319-2788 and we'll give you a clear, no-pressure quote for your Gulf Shores property.

My beach cottage near West Beach Boulevard has rusted screws and some loose panels. Can you fix that without replacing the whole roof?
Yes, that's one of our most common jobs in Gulf Shores. Salt air corrodes standard screws quickly, and wind can work panels loose over time. We offer screw replacement and re-fastening starting at $750, and we can replace individual panels if needed. We'll inspect the whole roof and give you an honest assessment of whether a repair is enough or if a larger replacement makes sense.
How fast can you respond after a storm hits Gulf Shores?
We prioritize storm and wind damage repairs and offer free inspections. After a major storm, call us at (251) 319-2788 and we'll schedule an inspection as soon as possible. We document the damage for your insurance claim and can often make temporary repairs to prevent further water intrusion while you wait for a permanent fix.
What does a metal roof cost for a typical Gulf Shores home?
For a standard beach cottage or single-family home, most metal roof installations fall between $8 and $12 per square foot, depending on the material and complexity. Standing seam is at the higher end, while corrugated or ribbed panels are more economical. Repairs are often a few hundred dollars, and we always provide a free estimate so you know exactly what to expect.
Do I need a permit to replace my roof in Gulf Shores?
Yes, roofing permits are commonly required for a full replacement or re-roof in Gulf Shores, and the requirements vary by jurisdiction. We handle the permitting process for you and make sure the work meets local wind and building codes. If your property is in a historic district or HOA, there may be additional design review, and we can help you navigate that.
My HOA requires a specific roof color and style. Can you help with that?
Absolutely. We work with many HOAs and property managers in Gulf Shores and understand the approval process. We can provide samples and documentation for your HOA's architectural review, and we'll make sure the panel profile and color meet their guidelines. We also respect property lines and coordinate with neighbors on tight lots to avoid any issues.
Are you fully insured for work in Gulf Shores?
Yes, we are fully insured with general liability and workers' compensation coverage. We're happy to provide proof of insurance before we start any work on your property. You can have peace of mind knowing our team is covered.
What maintenance does a metal roof need in Gulf Shores?
Because of the salt air, we recommend an annual inspection to check fasteners, flashing, and panel condition. Coating or painting every few years can extend the life of the roof and protect it from corrosion. After storm season, it's wise to have us check for loose panels or wind damage. Regular maintenance is the best way to avoid costly repairs.
Why choose us?

Trusted professionals in Mobile

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Mobile

All your work handled by qualified professionals in Mobile

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

309+ Verified Client Reviews in Mobile

⭐⭐⭐⭐⭐ 4.9/5 · 309 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Mobile · Response within 24h · No commitment · ☎ (251) 319-2788

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Mobile ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm