Serving the Mobile area  ·  (251) 319-2788  ·  Open Mon-Sun 7am-7pm
📞 (251) 319-2788 Free Quote

Metal Roofing in Foley, AL (36535) · Local Professionals

Mobile Metal Roofing · Fast response in Foley and the Mobile area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+309Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Foley is a fast-growing Gulf Coast city where new subdivisions off County Road 12 and the Beach Express sit alongside older farmsteads and manufactured homes on larger rural lots. The mix of brick-and-siding homes, many built in the last 30 years, and older properties with low-pitched shingle roofs means one thing: when hurricane season rolls in, the roof takes the hit.

Homeowners in Foley (36535) call Mobile Metal Roofing because we know how Gulf Coast wind and salt air treat a roof. From the neighborhoods near Foley High School to the lots out toward Bon Secour, we install, repair, and replace metal roofing built for this climate.

Metal Roofing in Foley (36535)

Foley sits on flat, sandy-clay ground with a high water table in places, so drainage and roof pitch matter. Many homes here have low-slope roofs that shed water slowly during the daily summer thunderstorms. We see failed fasteners, separated seams, and flashing gaps that let water in during heavy rain. The salt air near the bay and the steady Gulf breeze also work on metal, which is why we recommend finishes and fasteners rated for coastal conditions. On larger rural lots, we deal with long driveways and tight access for equipment, and we plan for that before we start.

Our team has worked across Mobile and Baldwin County, including Foley, Robertsdale, and Gulf Shores. We know the local building department requirements and can help you understand what permits are needed for a re-roof or replacement. We also document storm damage for insurance claims, but we never promise coverage or suggest a deductible can be waived.

Our services in Foley

How a Job Works in Foley

Step 1: Call us at (251) 319-2788 or request a free estimate online. We will schedule a time to inspect your roof, discuss your options, and give you a written estimate. We look at the roof deck, flashing, and attic ventilation, and we take photos so you can see what we see.

Step 2: Once you approve the estimate, we pull the required permits (if needed) and schedule the work. For a metal roof over shingles (retrofit), we check that the existing layers meet code limits. In Foley, HOA or historic district approval may be needed for certain panel profiles or colors, and we can help you navigate that. We keep the job site organized and protect your landscaping.

Step 3: After installation, we clean up thoroughly, haul away old materials, and do a final walkthrough with you. We make sure you know how to care for your new metal roof and that you are satisfied before we leave.

Pricing for metal roofing in Foley depends on the size and pitch of your roof, the material you choose, and the condition of the existing roof. As a ballpark, metal roof installation starts at $8 per square foot, standing seam at $10, metal roof replacement at $9, and metal roof over shingles (retrofit) at $7. Repairs start at $450, and screw replacement and re-fastening starts at $750. Coating and painting starts at $2.50 per square foot. These are starting prices, and your actual cost will vary. Call (251) 319-2788 for a free estimate tailored to your home.

My house is near the Foley Sports Tourism complex and we get strong winds off the open fields. Will a standing seam roof hold up better than shingles?
Yes. Standing seam metal roofing is one of the best choices for wind-prone areas because the panels are attached with concealed fasteners and interlocking seams. It eliminates the exposed screws that can back out and the shingle tabs that can lift in high winds. We install standing seam to manufacturer specs for wind uplift, and we can review your specific location and roof shape to recommend the right profile.
A storm just knocked a limb onto my roof in Foley. Can you come out for emergency repairs?
We handle storm and wind damage repairs, including fallen-limb punctures and wind-lifted panels. Call us at (251) 319-2788 to schedule an inspection. We offer free inspections for storm damage and will document what we find for your insurance claim. We do not promise coverage, but we help you gather the information your adjuster needs.
What does a metal roof over shingles cost in Foley compared to a full replacement?
Metal roof over shingles (retrofit) starts at $7 per square foot, while a full metal roof replacement starts at $9 per square foot. The retrofit can save money if your existing roof is in good shape and meets code for the number of layers. We will inspect your roof and tell you which option makes sense for your home.
Do I need a permit for a metal roof in Foley, and does the city have design rules?
Yes, roofing permits are commonly required for a full replacement or re-roof in Foley. The exact requirements and fees vary, so we always check with the city building department before starting. If your home is in a historic district or HOA, there may be additional design review for panel profile and color. We can help you understand what is needed and coordinate the paperwork.
My neighbor and I share a property line, and I want to make sure my new metal roof does not cause drainage issues on their side. What should I do?
We design roof drainage to keep water on your property and away from structures. If your roof runoff currently flows toward your neighbor, we can discuss gutter placement and downspout extensions. For property line questions, it is best to check your survey and local rules. We can also coordinate with your HOA if there are architectural requirements.
Are you insured for work at my Foley home?
Yes. Mobile Metal Roofing is fully insured with general liability and workers' compensation coverage. We are happy to provide proof of insurance before we start any work on your property.
What maintenance does a metal roof need in Foley's humid climate?
In Foley's heat and humidity, we recommend an annual inspection to check fasteners, seals, and flashing. Screws can loosen over time, and sealant can dry out. We offer screw replacement and re-fastening starting at $750, and coating or painting starting at $2.50 per square foot to extend the life of your roof. Keeping gutters clear and trimming overhanging limbs also helps prevent problems.
Why choose us?

Trusted professionals in Mobile

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Mobile

All your work handled by qualified professionals in Mobile

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

309+ Verified Client Reviews in Mobile

⭐⭐⭐⭐⭐ 4.9/5 · 309 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Mobile · Response within 24h · No commitment · ☎ (251) 319-2788

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Mobile ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm