Serving the Mobile area  ·  (251) 319-2788  ·  Open Mon-Sun 7am-7pm
📞 (251) 319-2788 Free Quote

Metal Roofing in Bay Minette, AL (36507) · Local Professionals

Mobile Metal Roofing · Fast response in Bay Minette and the Mobile area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+309Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Bay Minette is the kind of town where a metal roof just makes sense. With its mix of older shingle roofs on small-town homes and long tin roofs on Baldwin County farms, the housing stock here takes a beating from heat, humidity, and hurricane-season wind. Whether you're near the courthouse square or out on a rural route off Highway 31, we know the local conditions that test a roof.

Homeowners in Bay Minette (36507) call Mobile Metal Roofing because we understand the specific challenges of roofing here: from the sandy-clay soil that can shift under older structures to the wind-driven rain that finds every gap. We're based in Mobile and serve Bay Minette and the surrounding areas, and we've worked on everything from historic homes to modern farm buildings. When you need a straight answer about a repair or a replacement, we're the local team that shows up and does the job right.

Metal Roofing in Bay Minette (36507)

Bay Minette sits in northern Baldwin County, where the terrain rolls a bit more than down on the coast, and the soil is a mix of sandy loam and clay. That means drainage matters, and so does how a roof is flashed and sealed. Many homes here are on larger lots with mature pines and oaks, which is great for shade but means fallen limbs and debris are a constant threat to shingles and metal panels alike. The older homes near downtown often have steep gable roofs, while the newer subdivisions and farm properties tend to have lower slopes. We've seen it all, from 1920s bungalows to modern barndominiums. Our team knows how to handle the tight access on some of the in-town lots and the wide-open spaces on the farms. We also understand that in Bay Minette, a metal roof isn't just about looks; it's about holding up to the afternoon thunderstorms and the occasional tropical system that rolls through.

We've been serving Bay Minette and the Mobile area for years, and we've built a reputation for honest assessments and quality work. Whether it's a small leak repair on a tin roof or a full standing seam installation on a new build, we bring the same level of care.

Our services in Bay Minette

How a Job Works in Bay Minette

Step 1: You call us at (251) 319-2788 or fill out our online form. We'll schedule a free on-site assessment at your convenience. Our team will inspect your roof, take measurements, and discuss your options, whether it's a repair, a replacement, or a new installation. We'll also check for any signs of storm damage or wear and tear that might not be obvious from the ground.

Step 2: Once you approve the estimate, we'll order materials and schedule the work. In Bay Minette, we coordinate with the local building department for permits, which are typically required for a full replacement. If you live in a neighborhood with an HOA, we'll help you navigate the approval process for panel profile and color. Our crew arrives on time and works efficiently, keeping you informed of progress. We take care to protect your landscaping and keep the job site tidy.

Step 3: After the work is done, we do a thorough cleanup, including magnet sweeping for nails and debris. We'll walk through the finished job with you to make sure you're satisfied and answer any questions. We don't consider a job complete until you're happy.

We know that pricing is a big concern, so here's a realistic ballpark for common jobs in Bay Minette. Metal roof installation starts at $8 per square foot, standing seam at $10, replacement at $9, and roof-over-shingles at $7. For repairs, most start around $450, and screw replacement or re-fastening starts at $750. Corrugated panel roofing is our most economical option at $5.50 per square foot, while copper and specialty metals start at $20. Keep in mind that actual costs depend on the size of your roof, its complexity, access, and the condition of the existing structure. We offer free estimates, so call (251) 319-2788 to get a precise quote for your Bay Minette home.

My house is near the Bay Minette courthouse square, and the roof is original to the 1950s. Is it worth repairing or should I replace it?
Older homes around downtown often have roofs that are past their prime, especially if they've had multiple patch jobs. We'll inspect the decking and framing to see if a repair makes sense or if a full replacement is more cost-effective in the long run. With metal roofing, you can often extend the life of the structure and improve energy efficiency.
A storm just blew through and lifted some panels on my barn off Highway 31. Can you come out quickly?
Yes, we offer storm and wind damage repair with free inspections. Call us at (251) 319-2788, and we'll schedule a visit as soon as possible to secure your roof and prevent further damage. We work with insurance claims and can provide documentation for your adjuster.
What's the typical cost to replace a shingle roof with metal on a 1,500-square-foot house in Bay Minette?
For a basic corrugated panel roof, you might start around $8,250 (1,500 sq ft x $5.50), but most homeowners choose standing seam or metal shingles, which run $9 to $10 per square foot, so $13,500 to $15,000. Factors like roof pitch, number of penetrations, and whether we need to remove existing shingles will affect the final price. We provide free estimates.
Do I need a permit for a metal roof replacement in Bay Minette, and how long does it take?
Yes, the City of Bay Minette requires a permit for roof replacements. The process typically takes a few days to a week, depending on the workload of the building department. We handle the permit application for you and ensure all inspections are passed. Requirements can vary, so we always verify with the local building department.
My neighbor's tree hangs over my property line, and I'm worried about limbs damaging my new metal roof. What can I do?
It's best to discuss the tree with your neighbor and possibly have it trimmed back. If it's on your property, regular maintenance is key. For HOA communities, check the covenants about tree trimming and roof color approval. We can also install snow guards or additional fasteners in high-risk areas to protect your roof from impact.
Are you fully insured for work in Bay Minette, and what does that cover?
Yes, we carry general liability insurance and workers' compensation for all our crew members. This protects you and your property in the unlikely event of an accident.
What should I do to maintain my metal roof in Bay Minette's humid climate?
Inspect your roof twice a year, especially after storm season. Check for loose fasteners, debris buildup in valleys, and any signs of rust or corrosion. We offer maintenance plans that include inspections and minor repairs to keep your roof in top shape. Call us at (251) 319-2788 to schedule a maintenance check.
Why choose us?

Trusted professionals in Mobile

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Mobile

All your work handled by qualified professionals in Mobile

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

309+ Verified Client Reviews in Mobile

⭐⭐⭐⭐⭐ 4.9/5 · 309 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Mobile · Response within 24h · No commitment · ☎ (251) 319-2788

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Mobile ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm